"Convert XLS" A XLSB Excel Binary Workbook Converter ...

Problem running php on nginx ubuntu (files get downloaded)

Hi everyone,
I'm very new to php and ran into some issue that I have been trying to fix for a couple of hours.
I have setup Nginx on ubuntu 19.10, and installed php7.4-fpm. But whenever I try to open a file like index.php, located in my root folder /vawww/html (so localhost/index.php) it will download the file instead of running it.
Nginx is not communicating with php7.4-fpm, is my guess, but I can not find the mistake in my configuration files..

Could anyone take a look and spot what would be wrong.
Below I've put the files, in order
  1. /etc/nginx/fastcgi.conf:
  2. /etc/nginx/fastcgi_params:
  3. /etc/nginx/sites-enabled/server.conf
  4. /etc/nginx/mime.types
  5. /etc/php/7.4/fpm/php-fpm.conf
  6. /etc/php/7.4/fpm/pool.d/www.conf
  7. selection of /etc/php/7.4/fpm/php.ini since posting it all is too long
  8. output service nginx status & service php7.4-fpm status

If I'm looking at the wrong files or something and the error could be located elsewhere please guide me in the right direction.
And if you already read this far, I would like to thank you for your time!

1/etc/nginx/fastcgi.conf:


fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REQUEST_SCHEME $scheme; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; 

2. /etc/nginx/fastcgi_params:

fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REQUEST_SCHEME $scheme; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; 

3. /etc/nginx/sites-enabled/server.conf

# Version=2.1 server { listen 80; listen [::]:80; listen 443 ssl http2; listen [::]:443 ssl http2; # # This file will be managed by ATK, and overwitten without warning. # # To enable external access please consider installing DuckDNS using ATK. # # For external access using a custom domain: # # 1) Make a copy of this file and rename it to match your domain # # ex: /etc/nginx/sites-available/mydomain.com.conf # # 2) Edit your file and replace the entire `server_name` line with `server_name mydomain.com;` # # (do not include IP addresses) # # 3) Run `sudo ln -s /etc/nginx/sites-available/mydomain.com.conf /etc/nginx/sites-enabled/mydomain.com.conf` # # 4) Run `sudo systemctl reload nginx` # # You can then use ATK to run Certbot on your custom domain for HTTPS # # You can also modify your new file to enabling some of the extra features below by uncommenting the lines # # If you modify your file you will need to rerun the command in step 4 above server_name 127.0.0.1 localhost 192.168.1.248 0.0.0.0; access_log /valog/nginx/server.atomic.access.log; error_log /valog/nginx/server.atomic.error.log; index index.html index.php; root /vawww/html/; client_body_buffer_size 128k; client_max_body_size 100M; send_timeout 5m; server_tokens off; location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_pass unix:/varun/php7.4-fpm.sock; fastcgi_index index.php; include fastcgi.conf;} location ~ /\.ht { deny all; } ## # Snippet Config ## include /etc/nginx/snippets/gzip.atomic.conf; # include /etc/nginx/snippets/headers-hsts.atomic.conf; # WARNING: Only enable Strict Transport after confirming HTTPS is working include /etc/nginx/snippets/headers.atomic.conf; # include /etc/nginx/snippets/https-redirect.atomic.conf; # WARNING: Only enable HTTPS Redirect after confirming HTTPS is working include /etc/nginx/snippets/letsencrypt.atomic.conf; include /etc/nginx/snippets/proxy.atomic.conf; # include /etc/nginx/snippets/ssl-dhparam.atomic.conf; # WARNING: Only enable dhparam after running `openssl dhparam -out /etc/nginx/dhparam.pem 4096` include /etc/nginx/snippets/ssl.atomic.conf; ## # App Location Config ## include /etc/nginx/locations-enabled/*.atomic.conf; ssl_certificate /etc/letsencrypt/live/****/fullchain.pem; # managed by Certbot ssl_certificate_key /etc/letsencrypt/live/****/privkey.pem; # managed by Certbot } 

4. /etc/nginx/mime.types

types { text/html html htm shtml; text/css css; text/xml xml; image/gif gif; image/jpeg jpeg jpg; application/javascript js; application/atom+xml atom; application/rss+xml rss; text/mathml mml; text/plain txt; text/vnd.sun.j2me.app-descriptor jad; text/vnd.wap.wml wml; text/x-component htc; image/png png; image/tiff tif tiff; image/vnd.wap.wbmp wbmp; image/x-icon ico; image/x-jng jng; image/x-ms-bmp bmp; image/svg+xml svg svgz; image/webp webp; application/font-woff woff; application/java-archive jar war ear; application/json json; application/mac-binhex40 hqx; application/msword doc; application/pdf pdf; application/postscript ps eps ai; application/rtf rtf; application/vnd.apple.mpegurl m3u8; application/vnd.ms-excel xls; application/vnd.ms-fontobject eot; application/vnd.ms-powerpoint ppt; application/vnd.wap.wmlc wmlc; application/vnd.google-earth.kml+xml kml; application/vnd.google-earth.kmz kmz; application/x-7z-compressed 7z; application/x-cocoa cco; application/x-java-archive-diff jardiff; application/x-java-jnlp-file jnlp; application/x-makeself run; application/x-perl pl pm; application/x-pilot prc pdb; application/x-rar-compressed rar; application/x-redhat-package-manager rpm; application/x-sea sea; application/x-shockwave-flash swf; application/x-stuffit sit; application/x-tcl tcl tk; application/x-x509-ca-cert der pem crt; application/x-xpinstall xpi; application/xhtml+xml xhtml; application/xspf+xml xspf; application/zip zip; application/octet-stream bin exe dll; application/octet-stream deb; application/octet-stream dmg; application/octet-stream iso img; application/octet-stream msi msp msm; application/vnd.openxmlformats-officedocument.wordprocessingml.document docx; application/vnd.openxmlformats-officedocument.spreadsheetml.sheet xlsx; application/vnd.openxmlformats-officedocument.presentationml.presentation pptx; audio/midi mid midi kar; audio/mpeg mp3; audio/ogg ogg; audio/x-m4a m4a; audio/x-realaudio ra; video/3gpp 3gpp 3gp; video/mp2t ts; video/mp4 mp4; video/mpeg mpeg mpg; video/quicktime mov; video/webm webm; video/x-flv flv; video/x-m4v m4v; video/x-mng mng; video/x-ms-asf asx asf; video/x-ms-wmv wmv; video/x-msvideo avi; } 

5. /etc/php/7.4/fpm/php-fpm.conf

;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix (/usr). This prefix can be dynamically changed by using the ; '-p' argument from the command line. ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Note: the default prefix is /var ; Default Value: none ; Warning: if you change the value here, you need to modify systemd ; service PIDFile= setting to match the value here. pid = /run/php/php7.4-fpm.pid ; Error log file ; If it's set to "syslog", log is sent to syslogd instead of being written ; into a local file. ; Note: the default prefix is /var ; Default Value: log/php-fpm.log error_log = /valog/php7.4-fpm.log ;syslog.facility = daemon ;syslog.ident = php-fpm ;log_level = notice ;log_limit = 4096 ;log_buffering = no ;emergency_restart_threshold = 0 ;emergency_restart_interval = 0 ;process_control_timeout = 0 ; process.max = 128 ; process.priority = -19 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;rlimit_files = 1024 ;rlimit_core = 0 ;events.mechanism = epoll ; When FPM is built with systemd integration, specify the interval, ; in seconds, between health report notification to systemd. ; Set to 0 to disable. ; Available Units: s(econds), m(inutes), h(ours) ; Default Unit: seconds ; Default value: 10 ;systemd_interval = 10 ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; Multiple pools of child processes may be started with different listening ; ports and different management options. The name of the pool will be ; used in logs and stats. There is no limitation on the number of pools which ; FPM can handle. Your system will tell you anyway :) ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p argument) ; - /usr otherwise include=/etc/php/7.4/fpm/pool.d/*.conf 

6. /etc/php/7.4/fpm/pool.d/www.conf

; Start a new pool named 'www'. [www] ;prefix = /path/to/pools/$pool user = user group = user listen = /varun/php/php7.4-fpm.sock listen.owner = user listen.group = user ;listen.mode = 0660 pm = dynamic pm.max_children = 5 pm.start_servers = 2 pm.min_spare_servers = 1 pm.max_spare_servers = 3 ;chroot = ;chdir = /vawww ;catch_workers_output = yes ;decorate_workers_output = no ;clear_env = no 7. /etc/php/7.4/fpm/php.ini [PHP] engine = On short_open_tag = Off precision = 14 output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = -1 ;open_basedir = disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare, disable_classes = zend.enable_gc = On zend.exception_ignore_args = On ;;;;;;;;;;;;;;;;; ; Miscellaneous ; ;;;;;;;;;;;;;;;;; expose_php = Off ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time = 360 max_input_time = 360 ;max_input_nesting_level = 64 ; How many GET/POST/COOKIE input variables may be accepted ;max_input_vars = 1000 ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 512M ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT display_errors = Off display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; variables_order = "GPCS" request_order = "GP" register_argc_argv = Off auto_globals_jit = On post_max_size = 8M auto_prepend_file = auto_append_file = default_mimetype = "text/html" default_charset = "UTF-8" ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; doc_root = user_dir = enable_dl = Off ;cgi.force_redirect = 1 ;cgi.nph = 1 ;cgi.redirect_status_env = ;cgi.fix_pathinfo=1 ;cgi.discard_path=1 ;fastcgi.impersonate = 1 ;fastcgi.logging = 0 ;cgi.rfc2616_headers = 0 ;cgi.check_shebang_line=1 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; file_uploads = On upload_max_filesize = 250M max_file_uploads = 20 ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; allow_url_fopen = On allow_url_include = Off ;user_agent="PHP" default_socket_timeout = 320 ;auto_detect_line_endings = Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ;extension=bz2 ;extension=curl ;extension=ffi ;extension=ftp ;extension=fileinfo ;extension=gd2 ;extension=gettext ;extension=gmp ;extension=intl ;extension=imap ;extension=ldap ;extension=mbstring ;extension=exif ; Must be after mbstring as it depends on it ;extension=mysqli ;extension=oci8_12c ; Use with Oracle Database 12c Instant Client ;extension=odbc ;extension=openssl ;extension=pdo_firebird ;extension=pdo_mysql ;extension=pdo_oci ;extension=pdo_odbc ;extension=pdo_pgsql ;extension=pdo_sqlite ;extension=pgsql ;extension=shmop ;extension=snmp ;extension=soap ;extension=sockets ;extension=sodium ;extension=sqlite3 ;extension=tidy ;extension=xmlrpc ;extension=xsl ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [CLI Server] cli_server.color = On [Date] ;date.timezone = [filter] ; http://php.net/filter.default ;filter.default = unsafe_raw ; http://php.net/filter.default-flags ;filter.default_flags = [iconv] ;iconv.input_encoding = ;iconv.internal_encoding = ;iconv.output_encoding = [imap] ;imap.enable_insecure_rsh=0 [intl] ;intl.error_level = E_WARNING ;intl.use_exceptions = 0 [sqlite3] ;sqlite3.extension_dir = ;sqlite3.defensive = 1 [Pcre] ;pcre.backtrack_limit=10000 ;pcre.recursion_limit=100000 ;pcre.jit=1 [Pdo] ;pdo_odbc.connection_pooling=strict ;pdo_odbc.db2_instance_name [Pdo_mysql] ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. pdo_mysql.default_socket= [Phar] ; http://php.net/phar.readonly ;phar.readonly = On ; http://php.net/phar.require-hash ;phar.require_hash = On ;phar.cache_list = [mail function] ; For Win32 only. ; http://php.net/smtp SMTP = localhost ; http://php.net/smtp-port smtp_port = 25 ; For Win32 only. ; http://php.net/sendmail-from ;sendmail_from = [email protected] ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ; http://php.net/sendmail-path ;sendmail_path = ;mail.force_extra_parameters = ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename mail.add_x_header = Off ; The path to a log file that will log all mail() calls. Log entries include ; the full path of the script, line number, To address and headers. ;mail.log = ; Log mail to syslog (Event Log on Windows). ;mail.log = syslog [ODBC] ; http://php.net/odbc.default-db ;odbc.default_db = Not yet implemented ; http://php.net/odbc.default-user ;odbc.default_user = Not yet implemented ; http://php.net/odbc.default-pw ;odbc.default_pw = Not yet implemented ; Controls the ODBC cursor model. ; Default: SQL_CURSOR_STATIC (default). ;odbc.default_cursortype ; Allow or prevent persistent links. ; http://php.net/odbc.allow-persistent odbc.allow_persistent = On ; Check that a connection is still valid before reuse. ; http://php.net/odbc.check-persistent odbc.check_persistent = On ; Maximum number of persistent links. -1 means no limit. ; http://php.net/odbc.max-persistent odbc.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ; http://php.net/odbc.max-links odbc.max_links = -1 ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. ; http://php.net/odbc.defaultlrl odbc.defaultlrl = 4096 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of odbc.defaultlrl and odbc.defaultbinmode ; http://php.net/odbc.defaultbinmode odbc.defaultbinmode = 1 [MySQLi] ; Maximum number of persistent links. -1 means no limit. ; http://php.net/mysqli.max-persistent mysqli.max_persistent = -1 ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements ; http://php.net/mysqli.allow_local_infile ;mysqli.allow_local_infile = On ; Allow or prevent persistent links. ; http://php.net/mysqli.allow-persistent mysqli.allow_persistent = On ; Maximum number of links. -1 means no limit. ; http://php.net/mysqli.max-links mysqli.max_links = -1 ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. ; http://php.net/mysqli.default-port mysqli.default_port = 3306 ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. ; http://php.net/mysqli.default-socket mysqli.default_socket = ; Default host for mysqli_connect() (doesn't apply in safe mode). ; http://php.net/mysqli.default-host mysqli.default_host = ; Default user for mysqli_connect() (doesn't apply in safe mode). ; http://php.net/mysqli.default-user mysqli.default_user = ; Default password for mysqli_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. ; http://php.net/mysqli.default-pw mysqli.default_pw = ; Allow or prevent reconnect mysqli.reconnect = Off [mysqlnd] ; Enable / Disable collection of general statistics by mysqlnd which can be ; used to tune and monitor MySQL operations. mysqlnd.collect_statistics = On ; Enable / Disable collection of memory usage statistics by mysqlnd which can be ; used to tune and monitor MySQL operations. mysqlnd.collect_memory_statistics = Off ; Records communication from all extensions using mysqlnd to the specified log ; file. ; http://php.net/mysqlnd.debug ;mysqlnd.debug = ; Defines which queries will be logged. ;mysqlnd.log_mask = 0 ; Default size of the mysqlnd memory pool, which is used by result sets. ;mysqlnd.mempool_default_size = 16000 ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes. ;mysqlnd.net_cmd_buffer_size = 2048 ; Size of a pre-allocated buffer used for reading data sent by the server in ; bytes. ;mysqlnd.net_read_buffer_size = 32768 ; Timeout for network requests in seconds. ;mysqlnd.net_read_timeout = 31536000 ; SHA-256 Authentication Plugin related. File with the MySQL server public RSA ; key. ;mysqlnd.sha256_server_public_key = [OCI8] ;oci8.privileged_connect = Off ;oci8.max_persistent = -1 ;oci8.persistent_timeout = -1 ;oci8.ping_interval = 60 ;oci8.connection_class = ;oci8.events = Off ;oci8.statement_cache_size = 20 ;oci8.default_prefetch = 100 ;oci8.old_oci_close_semantics = Off [PostgreSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off ; Maximum number of persistent links. -1 means no limit. ; http://php.net/pgsql.max-persistent pgsql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. ; http://php.net/pgsql.max-links pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [bcmath] ; Number of decimal digits for all bcmath functions. ; http://php.net/bcmath.scale bcmath.scale = 0 [browscap] ; http://php.net/browscap ;browscap = extra/browscap.ini [Session] session.save_handler = files ;session.save_path = "/valib/php/sessions" session.use_strict_mode = 0 ; Whether to use cookies. ; http://php.net/session.use-cookies session.use_cookies = 1 ; http://php.net/session.cookie-secure ;session.cookie_secure = session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.cookie_samesite = ; Handler used to serialize data. php is the standard serializer of PHP. ; http://php.net/session.serialize-handler session.serialize_handler = php session.gc_probability = 0 session.gc_divisor = 1000 ; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. ; http://php.net/session.gc-maxlifetime session.gc_maxlifetime = 1440 session.referer_check = ; Set to {nocache,private,public,} to determine HTTP caching aspects ; or leave this empty to avoid sending anti-caching headers. ; http://php.net/session.cache-limiter session.cache_limiter = nocache ; Document expires after n minutes. ; http://php.net/session.cache-expire session.cache_expire = 180 session.use_trans_sid = 0 ; Default Value: 32 ; Development Value: 26 ; Production Value: 26 session.sid_length = 26 session.trans_sid_tags = "a=href,area=href,frame=src,form=" ; Default Value: "" ; Development Value: "" ; Production Value: "" ;session.trans_sid_hosts="" session.sid_bits_per_character = 5 ;session.upload_progress.enabled = On ;session.upload_progress.cleanup = On ;session.upload_progress.prefix = "upload_progress_" ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS" ;session.upload_progress.freq = "1%" ;session.upload_progress.min_freq = "1" ; Only write session data when session data is changed. Enabled by default. ; http://php.net/session.lazy-write ;session.lazy_write = On [Assertion] ; Switch whether to compile assertions at all (to have no overhead at run-time) ; -1: Do not compile at all ; 0: Jump over assertion at run-time ; 1: Execute assertions ; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1) ; Default Value: 1 ; Development Value: 1 ; Production Value: -1 ; http://php.net/zend.assertions zend.assertions = -1 ;assert.active = On ;assert.exception = On ;assert.warning = On ;assert.bail = Off ;assert.callback = 0 ;assert.quiet_eval = 0 [COM] ;com.typelib_file = ;com.allow_dcom = true ;com.autoregister_typelib = true ;com.autoregister_casesensitive = false ;com.autoregister_verbose = true ;com.code_page= [mbstring] ;mbstring.language = Japanese ;mbstring.internal_encoding = ;mbstring.http_input = ;mbstring.http_output = ;mbstring.encoding_translation = Off ;mbstring.detect_order = auto ;mbstring.substitute_character = none ;mbstring.func_overload = 0 ;mbstring.strict_detection = On ;mbstring.http_output_conv_mimetype= ;mbstring.regex_stack_limit=100000 ;mbstring.regex_retry_limit=1000000 [gd] ;gd.jpeg_ignore_warning = 1 [exif] ;exif.encode_unicode = ISO-8859-15 ;exif.decode_unicode_motorola = UCS-2BE ;exif.decode_unicode_intel = UCS-2LE ;exif.encode_jis = ;exif.decode_jis_motorola = JIS ;exif.decode_jis_intel = JIS [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] ;sysvshm.init_mem = 10000 [ldap] ; Sets the maximum number of open links or -1 for unlimited. ldap.max_links = -1 [dba] ;dba.default_handler= [opcache] ; Determines if Zend OPCache is enabled ;opcache.enable=1 ; Determines if Zend OPCache is enabled for the CLI version of PHP ;opcache.enable_cli=0 ; The OPcache shared memory storage size. ;opcache.memory_consumption=128 ; The amount of memory for interned strings in Mbytes. ;opcache.interned_strings_buffer=8 ; The maximum number of keys (scripts) in the OPcache hash table. ; Only numbers between 200 and 1000000 are allowed. ;opcache.max_accelerated_files=10000 ; The maximum percentage of "wasted" memory until a restart is scheduled. ;opcache.max_wasted_percentage=5 ;opcache.use_cwd=1 ;opcache.validate_timestamps=1 ;opcache.revalidate_freq=2 ;opcache.revalidate_path=0 ;opcache.save_comments=1 ;opcache.enable_file_override= ;opcache.optimization_level=0x7FFFBFFF ;opcache.dups_fix=0 ;opcache.blacklist_filename= ;opcache.max_file_size=0 ;opcache.consistency_checks=0 ;opcache.force_restart_timeout=180 ;opcache.error_log= ;opcache.log_verbosity_level=1 ;opcache.preferred_memory_model= ;opcache.protect_memory=0 ;opcache.restrict_api= ;opcache.mmap_base= ; Facilitates multiple OPcache instances per user (for Windows only). All PHP ; processes with the same cache ID and user share an OPcache instance. ;opcache.cache_id= ; Enables and sets the second level cache directory. ; It should improve performance when SHM memory is full, at server restart or ; SHM reset. The default "" disables file based caching. ;opcache.file_cache= ; Enables or disables opcode caching in shared memory. ;opcache.file_cache_only=0 ; Enables or disables checksum validation when script loaded from file cache. ;opcache.file_cache_consistency_checks=1 ; Implies opcache.file_cache_only=1 for a certain process that failed to ; reattach to the shared memory (for Windows only). Explicitly enabled file ; cache is required. ;opcache.file_cache_fallback=1 ; Enables or disables copying of PHP code (text segment) into HUGE PAGES. ; This should improve performance, but requires appropriate OS configuration. ;opcache.huge_code_pages=1 ; Validate cached file permissions. ;opcache.validate_permission=0 ; Prevent name collisions in chroot'ed environment. ;opcache.validate_root=0 ; If specified, it produces opcode dumps for debugging different stages of ; optimizations. ;opcache.opt_debug_level=0 ; Specifies a PHP script that is going to be compiled and executed at server ; start-up. ; http://php.net/opcache.preload ;opcache.preload= ; Preloading code as root is not allowed for security reasons. This directive ; facilitates to let the preloading to be run as another user. ; http://php.net/opcache.preload_user ;opcache.preload_user= ; Prevents caching files that are less than this number of seconds old. It ; protects from caching of incompletely updated files. In case all file updates ; on your site are atomic, you may increase performance by setting it to "0". ;opcache.file_update_protection=2 ; Absolute path used to store shared lockfiles (for *nix only). ;opcache.lockfile_path=/tmp [curl] ; A default value for the CURLOPT_CAINFO option. This is required to be an ; absolute path. ;curl.cainfo = [openssl] ; The location of a Certificate Authority (CA) file on the local filesystem ; to use when verifying the identity of SSL/TLS peers. Most users should ; not specify a value for this directive as PHP will attempt to use the ; OS-managed cert stores in its absence. If specified, this value may still ; be overridden on a per-stream basis via the "cafile" SSL stream context ; option. ;openssl.cafile= ; If openssl.cafile is not specified or if the CA file is not found, the ; directory pointed to by openssl.capath is searched for a suitable ; certificate. This value must be a correctly hashed certificate directory. ; Most users should not specify a value for this directive as PHP will ; attempt to use the OS-managed cert stores in its absence. If specified, ; this value may still be overridden on a per-stream basis via the "capath" ; SSL stream context option. ;openssl.capath= [ffi] ; FFI API restriction. Possible values: ; "preload" - enabled in CLI scripts and preloaded files (default) ; "false" - always disabled ; "true" - always enabled ;ffi.enable=preload ; List of headers files to preload, wildcard patterns allowed. ;ffi.preload= 

8. output service nginx status & service php7.4-fpm status


# sudo service php7.4-fpm status ● php7.4-fpm.service - The PHP 7.4 FastCGI Process Manager Loaded: loaded (/lib/systemd/system/php7.4-fpm.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2020-03-03 17:01:34 CET; 1min 59s ago Docs: man:php-fpm7.4(8) Process: 620 ExecStartPost=/uslib/php/php-fpm-socket-helper install /run/php/php-fpm.sock /etc/php/7.4/fpm/pool.d/www.conf 74 (code=exited, status=0/SUCCESS) Main PID: 598 (php-fpm7.4) Status: "Processes active: 0, idle: 2, Requests: 0, slow: 0, Traffic: 0req/sec" Tasks: 3 (limit: 4915) Memory: 12.4M CGroup: /system.slice/php7.4-fpm.service ├─598 php-fpm: master process (/etc/php/7.4/fpm/php-fpm.conf) ├─618 php-fpm: pool www └─619 php-fpm: pool www Mär 03 17:01:34 user systemd[1]: Starting The PHP 7.4 FastCGI Process Manager... Mär 03 17:01:34 user systemd[1]: Started The PHP 7.4 FastCGI Process Manager. 

# sudo service nginx status ● nginx.service - A high performance web server and a reverse proxy server Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2020-03-03 17:01:39 CET; 2s ago Docs: man:nginx(8) Process: 639 ExecStartPre=/ussbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 657 ExecStart=/ussbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS) Main PID: 658 (nginx) Tasks: 5 (limit: 4915) Memory: 4.9M CGroup: /system.slice/nginx.service ├─658 nginx: master process /ussbin/nginx -g daemon on; master_process on; ├─659 nginx: worker process ├─660 nginx: worker process ├─661 nginx: worker process └─662 nginx: worker process Mär 03 17:01:39 user systemd[1]: Starting A high performance web server and a reverse proxy server... Mär 03 17:01:39 user systemd[1]: Started A high performance web server and a reverse proxy server. 
submitted by xmr123 to PHPhelp [link] [comments]

MAME 0.211

MAME 0.211

As we pass the half-way point of 2019, it’s time for MAME 0.211, with all the excitement that brings. In this release, SGI Indy and MIPS RC2030 workstations have been promoted to working. This is a major milestone in RISC workstation emulation. If you’re feeling nostalgic, why not try one of them out, and install IRIX or RISC/os, respectively? This release also includes better support for the China Education Computer Apple II derivatives, along with a preliminary software list. This opens a window to Chinese classroom technology in the late ’80s and early ’90s. Speaking of software lists, we’ve added over five hundred cleanly cracked Apple II software titles, and imported a whole lot of ZX Spectrum cassette images.
Looking away from computer emulation for a moment, Game & Watch preservation keeps progressing, with the addition of Ball (the earliest Game & Watch release) and the panorama screen version of Donkey Kong Jr. The Gaelco/Salter Pro Cycle Tele Cardioline exercise system has been promoted to working, and the Pro Stepper system has been added. System 573 MP3 audio has been greatly improved in this release, and support has been added for more Bally pinball sound boards. ClawGrip added example programs from the V.R. Technologies VT03 software development kit. Gemcrush, a rare brick breaking arcade game, has been added in this release.
There are lots of other improvements, including a fix for the fatal error when switching away from MAME in Direct3D full-screen mode. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

MAME 0.211

MAME 0.211

As we pass the half-way point of 2019, it’s time for MAME 0.211, with all the excitement that brings. In this release, SGI Indy and MIPS RC2030 workstations have been promoted to working. This is a major milestone in RISC workstation emulation. If you’re feeling nostalgic, why not try one of them out, and install IRIX or RISC/os, respectively? This release also includes better support for the China Education Computer Apple II derivatives, along with a preliminary software list. This opens a window to Chinese classroom technology in the late ’80s and early ’90s. Speaking of software lists, we’ve added over five hundred cleanly cracked Apple II software titles, and imported a whole lot of ZX Spectrum cassette images.
Looking away from computer emulation for a moment, Game & Watch preservation keeps progressing, with the addition of Ball (the earliest Game & Watch release) and the panorama screen version of Donkey Kong Jr. The Gaelco/Salter Pro Cycle Tele Cardioline exercise system has been promoted to working, and the Pro Stepper system has been added. System 573 MP3 audio has been greatly improved in this release, and support has been added for more Bally pinball sound boards. ClawGrip added example programs from the V.R. Technologies VT03 software development kit. Gemcrush, a rare brick breaking arcade game, has been added in this release.
There are lots of other improvements, including a fix for the fatal error when switching away from MAME in Direct3D full-screen mode. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to MAME [link] [comments]

MAME 0.211

MAME 0.211

As we pass the half-way point of 2019, it’s time for MAME 0.211, with all the excitement that brings. In this release, SGI Indy and MIPS RC2030 workstations have been promoted to working. This is a major milestone in RISC workstation emulation. If you’re feeling nostalgic, why not try one of them out, and install IRIX or RISC/os, respectively? This release also includes better support for the China Education Computer Apple II derivatives, along with a preliminary software list. This opens a window to Chinese classroom technology in the late ’80s and early ’90s. Speaking of software lists, we’ve added over five hundred cleanly cracked Apple II software titles, and imported a whole lot of ZX Spectrum cassette images.
Looking away from computer emulation for a moment, Game & Watch preservation keeps progressing, with the addition of Ball (the earliest Game & Watch release) and the panorama screen version of Donkey Kong Jr. The Gaelco/Salter Pro Cycle Tele Cardioline exercise system has been promoted to working, and the Pro Stepper system has been added. System 573 MP3 audio has been greatly improved in this release, and support has been added for more Bally pinball sound boards. ClawGrip added example programs from the V.R. Technologies VT03 software development kit. Gemcrush, a rare brick breaking arcade game, has been added in this release.
There are lots of other improvements, including a fix for the fatal error when switching away from MAME in Direct3D full-screen mode. You can get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

Clones promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to cade [link] [comments]

Study: What Really Helps to Reduce the File Size of Your Excel Workbook

You’ve just finished your work and want to send your file to your boss. He is waiting for it. But instead of sending the email, you just receive and error: The file size is too large. This is the moment you tell yourself not to panic. And actually there is no reason to panic. There are many ways to reduce the file size of your Excel workbook. There is a lot of advice on the internet of how to reduce the file size of an Excel workbook. We’ve also published an article about that. But which of these methods really help? We can’t say for sure. That’s why we’ve conducted a study, applying the most popular (and some more) methods for reducing the file size. Here are the results.
Sorry
Method Before we start, some words about the method (let’s keep it short here, though). We used an Excel file with two worksheets, each sheet has got 3 columns and 10,000 data sets (+ 1 heading row). Sheet1 has pure data as hard values, Sheet2 has data in column A and VLOOKUPs in columns B and C. We always change one aspect and see the effect on the file size. Please note: The values of the possible reduction are only valid for this specific test file. With this study we want to examine the general impact of each advice. For your file, the actual result might differ.
Results of reducing the file size
Advice 1: Save as XLSB file instead of XLSX The default file format in Excel is XLSX. But there are also alternatives: The old format XLS or the less known format XLSB. The “B” in XLSB stands for binary. The XLSX format is basically a XML format. Worksheets are saved in the XML file type. But back to our question: Which file type is the smallest? For our test file, the XLSX file is 696 KB large. We didn’t add any formatting, just data and VLOOKUP formulas. Saving the workbook as a XLS file will use 2,337 KB. That’s +236%. But there is also a smaller file type: XLSB. It just takes 509 KB. That’s almost 27% smaller than XLSX.
Advice 2: Don’t format the whole column Another very popular advice: Don’t apply formatting to the whole column. Instead, just format the cell range you use as shown in the picture on the right side. Is it true? We tested three options: 1. The file size with no formatting added to any cell. 2. The complete column with a green background and white font color. 3. Each row with alternating formatting (green background with white font color and clear background with black font (=default formatting). The result: The advice not to use formatting for other cells than the used cell range is partly true. Formatting 6 whole columns enlarged the size by 6 KB. But using alternating formatting on the complete column increased the file size by 11.4 MB (or 1,636%). But why does the alternating row formatting take so much space? Simplified speaking: If you use formating on the whole column, Excel only saves something like “Use style 1 in columns A, B, C”. But if your formatting changes in each row, Excel saves for every row - “Use style 1 in columns A, B, C and row 1” - “Use style 2 in columns A, B, C and row 2” - “Use style 1 in columns A, B, C and row 3” - and so on.
Advice 3: Replace formulas by values Does it help to replace formulas by values? In our test file we got 40,006 cells filled with hard values. Furthermore, we got 20,000 cells containing formulas (all VLOOKUP formulas). What effect does it have on the file size if we replace the 20,000 formula cells with their calculated values? The effect seems clear: The file size reduces by almost 22%. Our explanation: For formulas, Excel saves the formulas as well as the results. That way, you can immediately see the results of formulas – also when you open large files or your Excel is set to manual calculation. Another positive implication: The calculation is much faster. But – of course – hard values won’t be recalculated. Please note: This effect (as most of the others) highly depends on the number and length of the formulas in your workbook.
Advice 4: Use a shared cache for several PivotTables PivotTables have a large impact on your workbooks file size. We got a base file which has no PivotTable. After adding a PivotTable for 10,000 rows and 3 columns, the file size gains(?) 130 KB or 19%. By adding another PivotTable of the same source data – without using the same cache – the file size gets 129 KB bigger. But if we choose to use the same cache for both PivotTables, the file size just gains 2 KB when adding the second PivotTable. Or in other words: We reduce the file size by 13%.
Advice 5: Avoid region specific characters In our study about how to reduce the calculation time we found out that changing the computers region has an extremely big impact. So is there a similar effect on the file size if we use special characters? In order to determine the impact on the file size we replaced all standard English letters by random German special characters. So we only use Ä, Ö, Ü, ä, ö, ü and ß. In total, we replaced 10,000 of 60,006 cells that way. Surprisingly, the file size even reduces slightly, in this case by 1.8%.
Advice 6: Use VLOOKUP instead of SUMIFS or INDEX-MATCH This is our old battle: VLOOKUP vs. INDEX-MATCH vs. SUMIFS. While the SUMIFS formula has many advantages towards VLOOKUP and INDEX-MATCH, it comes with two major disadvantages: It can only return numeric values or dates and it slows down the calculation speed significantly. But what about the file size? The effect is clear: SUMIFS enlarges the file size. In our test file we replaced 10,000 VLOOKUP formulas with SUMIFS. This leads to a 30% bigger file. INDEX-MATCH on the other hand just enlarge the file size by 1.2%.
Advice 7: Remove unnecessary named ranges Sometimes Excel files collect several thousands of named ranges. Especially software for exporting data to Excel often creates lot’s of them. The problem: Most of them are not visible to the user (e.g. not shown in the name manager) and they usually just keep getting more. In order to see the effect on the file size, we created 1,000 named ranges with a VBA macro. So what is the impact on the file size? Our test shows that the effect is just minor. 1,000 named ranges increase the file size approximately 6 KB – that’s 0.8% of our test file.
Advice 8: Use the “Table format” Excel offers a so-called “Table format”. It’s basically type of table, organized in a structured way. If you convert your table to the table format, do you save space on the disk? The answer is: yes. Our test file is app. 6.6% smaller compared to using normal ranges.
Advice 9: ZIP your Excel file Excel files are actually ZIP files. If you are interested in seeing all the contents of your workbook you can just change the file type ending of the file name: Write “.ZIP” instead of “.XLSX”. Don’t ZIP your file, really just rename it. Now you can unzip it. You will be able to see all the enclosed files. Our question: As Excel files are already zipped files, does it make sense to ZIP them one more time? Surprisingly, we reduced the file size by 15% after zipping our Excel file.
Advice 10: Don’t use pictures in your workbook Pictures by nature take a lot of disk space. So what happens if you add pictures to your Excel workbook? We’ve conducted several steps: First we noted the file size of an Excel workbook without any images. Then we added a 829 KB picture. Surprisingly, the file size of our test workbook only increased by 329 KB. So we assumed that Excel already applies some kind of compression. It might also be related to the fact, that Excel files are ZIP files as described in our advice 9. Now we used the compression feature, provided by Excel. We chose the option “E-Mail 96 PPI” in order to minimize the document size. The result: Our originally 829 KB picture was already reduced to 329 KB by just inserting it. The compression further reduced the size to 103 KB. Our workbook size was reduced by 22% through the action of compression the picture. Of course, this highly depends on your Excel file and your picture.
Summary There are many ways to reduce the file size of your Excel file. In our test we found out that some of the work quite well and others just have a very small effect. - The most important advice: Don’t use alternating formatting on the whole column. If you want to use formatting on a column make sure, that you apply it to the complete column. - Are you still using the old XLS format? Maybe now it’s time to change to the “new” XLSX file type and save up to 70% - Furthermore, you can save between 27% and 70% by not using XLSX file type but rather XLSB. - You are a fan of the SUMIFS formula for lookups? If you use VLOOKUP or INDEX-MATCH, you could save app. 22% to 23% of file size. - If your Excel file contains images, you might want to consider using the compression feature in Excel. Our test file was reduced by 22%. - Another option for reducing the file size of your Excel workbook is to replace formulas by values. - PivotTables use a cache for the data. If you could avoid PivotTables, you could reduce the file size. If you got several PivotTables using the same data source, make sure that they share the same cache. - Zipping your Excel file could further reduce the file size. - All the other advice seem to have only a minor impact on the file size.
EDIT: Sorry, but without the charts it looks quite boring. The full study is here: http://professor-excel.com/study-reduce-file-size-excel-workbook/
submitted by ProfessorExcel to excel [link] [comments]

How to use DAX functions in Power-BI?

How to use DAX functions in Power-BI?

How to use DAX functions in Power-BI?
Hi folks, I hope you all are doing well. In our daily work, we all use calculations to get the result of anything. And, also we all work with data ( Any kind ). Without making this article boring let’s come to the gist ( “essence” or “the main point.” ) of the topic. The first question that comes to our mind is “what is DAX” and “What is Power-Bi ?”. So, the answer is DAX is a language which is used to do calculations on data and Power-Bi is a tool that helps you to create report and dashboard based on data. To generate or measure new values or meaningful data we use DAX.
Let’s go into deep of it. Before we go ahead- Let’s check the below pointer first-

What is Power-BI?

Power-Bi is a Microsoft tool that gives us a platform to easily create reports and dashboards using data. Data can come from any source like database, csv, xls file and so on. Power-Bi provides multiple functionalities to manipulate the data and visuals also. It comes with two packages as Power-Bi service and Power-Bi desktop. Power is one of the most successful tools of Microsoft for visualizing the data in the form reports or dashboard. Below is the screen-shot of Power-Bi tool.
This is a widely used visualization tool which is used entirely at every section and domain of the technology. This tool not only helps to cerate better dashboards and reports but also help to ensure better insights for the requirements. When we talk about insights these are the solution which we can drive from this POWER BI visualization tool for a large number of data. The Data varies from the hundred to millions. These reports are easily understandable and user-friendly and one can quickly derive, meaningful information out of it.

What is DAX?

DAX is “Data Analysis Expression”. I guess you all understand the meaning of DAX by just reading it. DAX is used to analyze or generate new data based on existing data. DAX is a combination of functions, constants, and operators that are used in an expression to calculate the desired values or results.
DAX plays a major role in power-bi for manipulating the data as per our need at any time with simple functions. DAX is a functional language that contains a fully executed code inside the function. DAX is designed to work with tables, that’s why it has only two data-type Numeric or other. Numeric data-type refers to integers, decimals and currency. Other refers to string and binary objects.
This language is used only in POWER BI setup which helps to derive the better meaning of the raw data dn to convert them to meaningful information. Likewise, we work on any programming language to simplify data similarly DAX is used in POWER BI to access the raw and large number of information into useful and meaningful pieces of information. DAX is not set with day 1 launch of POWER BI it was launched in the improvements of POWER BI and was introduced via their blog section. And then came into existence for the users to work and get the useful outcomes.

Why DAX?

DAX provides extra and important ability to power-bi. Let’s take an example of sample data of employee salary and company profit data based on that data we need to calculate the gross annual profit or year-to-year profit. But without using DAX it is quite hard or impossible to calculate that value so, in this case, DAX is very helpful for us because it provides the function to perform that operation.
DAX is very easy to use and learn. DAX provides lots of functions like SUM(), Cal() etc to manipulate the data. It is very easy to use once the user understands their functions and constants. With this, one must use DAX function as this is highly in demand and used worldwide. Once you learn DAX it becomes easy to understand and reliable to use.

Let’s Start with DAX

To understand the DAX, first, we need to understand the three concepts of it: Syntax, functions and context.

Syntax

A Syntax is the structural representation of statements. It is the representation of formula as shown below.
📷
The above expression contains SUM DAX function that takes the Sales Amount column from Sales table and returns the sum of Sales Amount values as Total Sales.
NOTE: If the table name contains any kind of special character or spaces then you’ll need to define the table name within single quotation marks.

DAX Calculation types

There are two types of calculations done by using DAX as below:
  • Calculated columns
  • Calculated measures

Calculated Columns

📷
In this method one new column will be added in the table by clicking the Modeling tabs after that we need to select the new column option, it will show the calculation area. In the calculation area, we need to add the formula we want. The result will be reflected in the table as well as filed pane also. Below is the screen-shot of the same.

📷

Calculated Measures

In this section, we will perform the same operation as for the calculated column but we need to select the new measure option in the modeling tab. Also, the result will not affect the table but affect the field pane. Below is the screen-shot of the same.

📷

DAX functions

There are six types of DAX function to reshape the data. Below is the list of functions that we will use to calculate the new values based existing values.
  • Aggregation functions
  • Counting functions
  • Logical functions
  • Information functions
  • Text functions
  • Date functions
We can use the above functions in anytime to evaluate the desired values from the existing values. For more info, you can check the link below.
https://docs.microsoft.com/en-us/power-bi/guided-learning/introductiontodax?tutorial-step=1

Conclusion

In this article, we have understood the basis of DAX in Power BI along with Syntax and functions. I will come up with more details into it in my next blog so keep following our blogs and for any queries, please feel free to share your views via the comment section below.
With this, if you have any doubt in writing DAX for the first time – kindly ping me here so I can connect with you and assist you.
Connect With Source Url:-
https://www.loginworks.com/blogs/how-to-use-dax-functions-in-power-bi/
submitted by ayushichaudhary1 to u/ayushichaudhary1 [link] [comments]

Affordable Binary Option Strategy  Trend Reversal ... How to Convert Binary to Decimal - YouTube How to Change Files Into Binary Workbook in Excel- Convert Binary Workbook Excel Tutorial in Hindi Binary to Decimal Using Excel! - YouTube Download ODS To XLS Converter Software 7 Full Version How To Convert Decimal to Binary - YouTube Binary Converter Spreadsheet - YouTube How to Obtain XML Script for Binary Bot  options trading ... Number System Conversion in Excel - Binary to Decimal in ... How to Convert Lat Long in DMS to Decimal Degrees in Excel

Convert Microsoft Excel binary workbook to Microsoft Excel Open XML workbook and spreadsheet. We have found 4 software records in our database eligible for .xlsb to .xlsx file format conversion. Using Microsoft Excel it should be quite possible to convert Excel's XLSB workbooks to more common XLSX format . Read on to learn about the best XLSX to PDF converter - PDFelement Pro PDFelement Pro. Free Download ... Edit PDF texts, images, and links with a broad range of editing options. Converting PDF to Word, PPT, Excel, Images and other formats. Adding and removing watermark and password from PDF. Convert and edit scanned PDF file with advanced OCR feature. Part 2. How to Convert XLSX to PDF on Mac ... Excel Binary Workbook Format There are many different Excel workbook filetypes—XLS, XLSB, XLSM, XLSX—, but one in particular stands out from the rest. That filetype is the Excel binary workbook format and has XLSB extension as XLS + B for Binary. This type of spreadsheet file differs from other Excel workbook format files (like […] File Extension conversion from BIN to XLSX is the conversion of computer file extensions from Binary File to Microsoft Office Excel (2007+) Spreadsheet. Furthermore, each computer program handles file extensions in a different manner. Whenever any one of these variables is changed, data must be converted in some way before it can be used by a different computer, operating system or program. The modified binary list files can then be placed back into various system level or app level directories as necessary. By the way, for those wondering why this tool is necessary, simply attempt to open a plist file in binary format with a text editor and you’ll quickly see the problem: The same plist file, when converted from binary to XML, opens in a text editor as a typical XML file which ... Options. Header & Footer. Header: Footer: 3) Get converted file. DOWNLOAD CONVERTED FILE. Full version. Get Total Excel Converter to convert XLS, XLSX, ODT, XLSM, etc. safely. Convert Excel Files in Batch!; Convert hundreds of spreadsheets in 3 clicks; Both MS Office and OpenOffice files; Have a desktop converter that works without Internet; Keep your files safe, don't send them to the web ... Options. Header & Footer. Header: Footer: 3) Get converted file. DOWNLOAD CONVERTED FILE. Full version. Get Total Excel Converter to convert XLS, XLSX, ODT, XLSM, etc. safely. Convert Excel Files in Batch!; Convert hundreds of spreadsheets in 3 clicks; Both MS Office and OpenOffice files; Have a desktop converter that works without Internet; Keep your files safe, don't send them to the web ... Myth: "Binary workbooks cannot be opened in LibreOffice or OpenOffice" False! Both suites support the XLSB file format for compatibility with Excel. Myth: "Formulas, VLOOKUP in particular, recalculate much faster in binary files" Excel data structures and algorithms residing in memory (RAM), including calculation, are not affected in any way by the file structure used, apart from Open and Save ... where options are: [--textxml-t { file_name }] : Output file as text XML [--binxml-b { file_name }] : Output file as binary XML [--version-V] : Show version [--help-h] : This help Notes: 1) source_file can be either binary XML or text XML 2) If no output file is given, then source_file is displayed on screen 4. Example-----Typical usage of binXml is to read a GRID binary XML file, convert ... 'Convert XLS' Supported File Types, Items in bold can be done without MS Excel installed. 1Note that the ‘Convert XLS’ conversion method can specify any character be used to delimit the data.So including the comma character, you could specify the TAB, Semicolon, Bar or any character in the ASCII chart.Specify the character by going to the OPTIONS button then click on the "CSV, TSV…"

[index] [4679] [3365] [14449] [18320] [11876] [16627] [1546] [7123] [29762] [37]

Affordable Binary Option Strategy Trend Reversal ...

This video explains how to make a spreadsheet to convert between binary and denary numbers This video explains how to convert binary to decimal using excel. It discusses how to use the base, decimal, and bin2dec as well as dec2bin functions in exce... This short video shows you how to convert Latitude Longitude values from Degree, Minutes, Seconds into Decimal Degrees. There is two parts to this. The first... Watch this video to learn how to convert number system in excel that is: binary to decimal in excel binary to octal in excel binary to hexadecimal excel deci... How to covert binary to Decimal its as easy as 1, 10, 11 How to Get FREE Signals, Follow these steps !!! 1. Visit My Youtube Channel here https://goo.gl/318pw7 2. Visit My Twitter Account Link on My Youtube Channel... Affordable Binary Option Strategy Trend Reversal Indicator Convert Detailed Better Binary Indicator Download: https://provenbinarybot.com/trend-reversal-... Download ODS To XLS Converter Software 7 crack from above website links. Follow the instructions in video to convert limited version into complete working software along with life time updates. How to Change Files Into Binary Workbook in Excel- Convert Binary Workbook Excel Tutorial in Hindi Make sure you've subscribed this channel. Also visit to ou... This video tutorial explains how to convert decimal to binary numbers. Decimal to Binary Using Excel: https://www.youtube.com/watch?v=IqfN8F3IQh0 My Website:...

http://binary-optiontrade.ivclimex.cf